Acoustic
Rounded-Square Acoustic Wall Panel
Item no. FXPVCWN54654612A 546 mm square acoustic panel with a rounded-square grid, PVC film over black MDF and a PET felt backing. Fixes flat to walls and ceilings for 60% sound absorption.
Acoustics without
losing the grain.
A four-panel grid of rounded squares, laminated in PVC film over black MDF with a PET felt backing — the open joint lines and porous back layer absorb mid and high frequencies.
Each panel is 546 mm square, so the grid repeats cleanly across a wall or ceiling without bespoke cutting.
- 60% sound absorption — measured on the assembled panel
- Rounded-square grid reads as architecture, not acoustic foam
- Fixing method: glue, nail or staple onto studs or furring
1/2 in. (≈12.7 mm) — Rounded-square acoustic grid
Technical data
Dimensions & coverage
- Board width
- 21 1/2 in. (546 mm)
- Board length
- 21 1/2 in. (546 mm)
- Board thickness
- 1/2 in. (≈12.7 mm)
- Edge profile
- Square edge
- Coverage per carton
- 12.84 sq.ft / carton
- Panels per carton
- 4
Materials & finish
- Construction
- PVC film + black MDF + black PET backing
- Surface
- PVC decorative film, 0.14 mm — rounded-square grid
- Profile
- Rounded-square acoustic grid
- Core
- Black MDF with PET felt backing
- Colorway
- Walnut
- Warranty
- 5 yr residential / 2 yr commercial
Installation & application
- Joint
- Overlap joint
- Fixing method
- Glue / Nail / Staple
- Application
- Interior walls & ceilings
- Grade
- On / Above
- Use area
- Indoor, dry areas (40–60% RH)
- Acoustic performance
- 60% sound absorption
Packing & logistics
- Cartons per pallet
- 72
- Pallets per container
- 40
- Pallet height
- 49.21 in.
- Box length
- 22.05 in.
- Terms
- FOB factory
- Country of manufacture
- Vietnam
Watch it go up
Glue, nail or staple — a two-person crew covers a full feature wall in an afternoon.
Snap a level baseline and vertical guides at panel widths. Dry-fit a full row first.
Fine-tooth saw, face down. Leave a 5 mm expansion gap top and bottom.
Zigzag adhesive on the back, press to wall, then brad-nail or staple every 300 mm into studs or furring.
Edges meet square to square — a hairline joint is correct. Check flushness with a straight edge.
Fill fixings with color-matched filler, seal gaps with caulk or trim, wipe down.
Good to know
- Let panels acclimatize flat for 24–48 h before install.
- Fix into studs or furring at max. 400 mm centres.
- Interior use only, dry areas. Indoor RH 40–60%.
Documents for your file
Everything your team and your customer need to specify this panel.
Product information sheet
Full technical data for this SKU: dimensions, construction, packing, warranty and ordering notes.
Download PDFInstallation guide
Tools, preparation, five-step installation for walls, ceiling notes and care instructions.
Download PDF