Acoustic
Channel Groove Wall Panel
Item no. GDPVCWN260018418Flat 184 mm boards with a machined channel groove, PVC film over natural MDF. Supplied in full 2600 mm lengths with a tongue & groove joint.
Wide boards.
Deep shadow lines.
Flat 184 mm boards separated by a machined channel groove, laminated in PVC film over natural MDF. The wider pitch gives a calmer, more architectural rhythm than fine fluting.
Panels run the full 2600 mm height with a tongue & groove joint, so the groove line stays continuous across every board.
- Full 2600 mm lengths — no short boards breaking the line
- Tongue & groove joint keeps boards aligned during fixing
- Wipeable PVC surface, no oiling or sealing required
11/16 in. (≈17.5 mm) — Channel groove
Technical data
Dimensions & coverage
- Board width
- 7 1/4 in. (184 mm)
- Board length
- 102 3/8 in. (2600 mm)
- Board thickness
- 11/16 in. (≈17.5 mm)
- Edge profile
- Square ends
- Coverage per carton
- 20.6 sq.ft / carton
- Panels per carton
- 4
Materials & finish
- Construction
- PVC film + natural MDF
- Surface
- PVC decorative film, 0.14 mm — flat boards with channel grooves
- Profile
- Channel groove, tongue & groove joint
- Core
- Natural MDF
- Colorway
- Walnut
- Warranty
- 5 yr residential / 2 yr commercial
Installation & application
- Joint
- Tongue & groove
- Fixing method
- Glue / Nail / Staple
- Application
- Interior walls & ceilings
- Grade
- On / Above
- Use area
- Indoor, dry areas (40–60% RH)
- Acoustic performance
- —
Packing & logistics
- Cartons per pallet
- 85
- Pallets per container
- 16
- Pallet height
- 49.21 in.
- Box length
- 102.76 in.
- Terms
- FOB factory
- Country of manufacture
- Vietnam
Watch it go up
Glue, nail or staple — a two-person crew covers a full feature wall in an afternoon.
Snap a level baseline and vertical guides at panel widths. Dry-fit a full row first.
Fine-tooth saw, face down. Leave a 5 mm expansion gap top and bottom.
Zigzag adhesive on the back, press to wall, then brad-nail or staple every 300 mm into studs or furring.
Edges meet square to square — a hairline joint is correct. Check flushness with a straight edge.
Fill fixings with color-matched filler, seal gaps with caulk or trim, wipe down.
Good to know
- Let panels acclimatize flat for 24–48 h before install.
- Fix into studs or furring at max. 400 mm centres.
- Interior use only, dry areas. Indoor RH 40–60%.
Documents for your file
Everything your team and your customer need to specify this panel.
Product information sheet
Full technical data for this SKU: dimensions, construction, packing, warranty and ordering notes.
Download PDFInstallation guide
Tools, preparation, five-step installation for walls, ceiling notes and care instructions.
Download PDF