Acoustic
Herringbone Acoustic Panel
Item no. YGPKJ122261009Veneer slats in a herringbone layout over black PET acoustic backing. 610 × 1222 mm panels, 3/8 in. thin, for walls and ceilings.
A pattern that
does the talking.
Individual veneer slats pressed in a herringbone layout onto a black PET sheet — the open joints between slats give the panel its acoustic behaviour and its shadow line.
At 610 × 1222 mm each panel covers a generous area, so a full wall needs fewer joints than slat-by-slat systems.
- Herringbone layout without on-site assembly
- PET backing for noise reduction
- Thin 3/8 in. profile — suits walls and ceilings
3/8 in. (≈9.5 mm) — Herringbone slats
Technical data
Dimensions & coverage
- Board width
- 24 in. (610 mm)
- Board length
- 48 1/9 in. (1222 mm)
- Board thickness
- 3/8 in. (≈9.5 mm)
- Edge profile
- Square edge
- Coverage per carton
- 80.24 sq.ft / carton
- Panels per carton
- 10
Materials & finish
- Construction
- Tech-wood veneer + black PET, water-based paint
- Surface
- Tech-wood veneer, 0.3 mm sliced — matte
- Profile
- Herringbone slat on PET backing
- Core
- Black PET acoustic backing
- Colorway
- Walnut
- Warranty
- 5 yr residential / 2 yr commercial
Installation & application
- Joint
- Butt joint
- Fixing method
- Glue / Nail / Staple
- Application
- Interior walls & ceilings
- Grade
- On / Above
- Use area
- Indoor, dry areas (40–60% RH)
- Acoustic performance
- Noise reduction
Packing & logistics
- Cartons per pallet
- 33
- Pallets per container
- 18
- Pallet height
- 49.21 in.
- Box length
- 48.82 in.
- Terms
- FOB factory
- Country of manufacture
- Vietnam
Watch it go up
Glue, nail or staple — a two-person crew covers a full feature wall in an afternoon.
Snap a level baseline and vertical guides at panel widths. Dry-fit a full row first.
Fine-tooth saw, face down. Leave a 5 mm expansion gap top and bottom.
Zigzag adhesive on the back, press to wall, then brad-nail or staple every 300 mm into studs or furring.
Edges meet square to square — a hairline joint is correct. Check flushness with a straight edge.
Fill fixings with color-matched filler, seal gaps with caulk or trim, wipe down.
Good to know
- Let panels acclimatize flat for 24–48 h before install.
- Fix into studs or furring at max. 400 mm centres.
- Interior use only, dry areas. Indoor RH 40–60%.
Documents for your file
Everything your team and your customer need to specify this panel.
Product information sheet
Full technical data for this SKU: dimensions, construction, packing, warranty and ordering notes.
Download PDFInstallation guide
Tools, preparation, five-step installation for walls, ceiling notes and care instructions.
Download PDF